Dell N1100-ON Reference Manual page 133

Command
show port protocol
show switchport ethertype
show vlan
show vlan association mac
show vlan association subnet
show vlan private-vlan
switchport access vlan
switchport dot1q ethertype
(Global Configuration)
switchport general forbidden
vlan
switchport general
acceptable-frame-type
tagged-only
switchport general allowed
vlan
switchport general ingress-
filtering disable
switchport general pvid
switchport mode
Description
Displays the Protocol-Based VLAN information
for either the entire system or for the indicated
group.
Displays the configured Ethertype for each
interface.
Displays detailed information, including
interface information and dynamic vlan type,
for a specific VLAN.
Displays the VLAN associated with a specific
configured MAC address.
Displays the VLAN associated with a specific
configured IP subnet.
Displays information about the configured
private VLANs.
Configures the VLAN ID when the interface is
in access mode.
Defines additional QinQ tunneling TPIDs for
matching in the outer VLAN tag of received
frames.
Forbids adding specific VLANs to a port.
Discards untagged frames at ingress.
Adds or removes VLANs from a port in General
mode.
Disables port ingress filtering.
Configures the PVID when the interface is in
general mode.
Configures the VLAN membership mode of a
port.
Dell EMC Networking CLI
a
Mode
PE
PE
PE
PE
PE
PE
IC
GC
IC
IC
IC
IC
IC
IC
133