Assign-Queue - Dell N1100-ON Reference Manual

classofservice trust match dstip6
conform-color
cos-queue min-
bandwidth
cos-queue random-
detect
cos-queue strict
diffserv
drop
mark cos

assign-queue

Use the assign-queue command in Policy-Class-Map Configuration mode to
modify the queue ID to which the associated traffic stream is assigned.
Syntax
assign-queue queueid
• queueid — Specifies a valid queue ID. (Range: integer from 0–6.)
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines
The queue id is the internal queue number (traffic class), not the CoS value.
Use the show classofservice command to display the assignment of CoS and
DSCP values to internal queue numbers.
match dstl4port
match ethertype
match ip6flowlbl
match ip dscp
match ip
precedence
match ip tos
match protocol
police-simple
police-single-rate
police-two-rate
policy-map
random-detect
queue-parms
random-detect
exponential-
weighting-constant
redirect
service-policy
Layer 2 Switching Commands
show diffserv service
brief
show interfaces cos-
queue
show interfaces
random-detect
show policy-map
show policy-map
interface
show service-policy
traffic-shape
vlan priority
661