Table of Contents
Advertisement
•
Slot# — The slot number is an integer number assigned to a particular
slot. Front panel ports have a slot number of 0. Rear panel ports are
numbered from 1 and can be identified by the lexan on the rear panel. Use
show slot
the
•
# — The port number is an integer number assigned to the physical
Port
port on the switch and corresponds to the lexan printed next to the port on
the front or back panel. Ports are numbered from 1 to the maximum
number of ports available on the switch unit, typically 24 or 48.
Logical interfaces are identified by one of the keywords: loopback, port-
channel, tunnel or vlan followed an integer index identifying the specific
logical interface.
Within this document, the tag interface–id refers to a logical or Ethernet
interface identifier that follows the naming convention above. If the
command is restricted to a subset of the interfaces, then the subset is
described in the command description. Ethernet interfaces are
Gigabitethernet, Tengigabitethernet, and Fortygigabitethernet. NBASE-T
interfaces running at 2.5 and 5 Gigabit speeds are identified as
Gigabitethernet.
command to retrieve information for a particular slot.
Using the CLI
224
Advertisement
Table of Contents
