Table of Contents
Advertisement
show access-lists interface
Use the show access-lists interface command to display interface ACLs.
Syntax
show access-lists interface {interface-id {in | out}} | control-plane
•
interface-id—The interface identifier (Ethernet, port-channel, or
VLAN).
•
in—Show the ingress ACLs.
out—
•
Show the egress ACLs.
•
control-plane—Show the control plane ACLs.
Default Configuration
No ACLs are configured by default.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
There are no user guidelines for this command.
Examples
console#show access-lists interface control-plane
ACL Type
--------
IPv6
show ip access-lists
Use the show ip access-lists command to display an IP ACL and time-range
parameters.
Syntax
show ip access-lists [accesslistname]
ACL Name
-------------------------------
ip61
Sequence Number
---------------
1000
Layer 2 Switching Commands
282
Advertisement
Table of Contents
