Example
The following example shows the qualifications status of the optics on the
switch.
console#show interfaces transceiver
Port
Dell Qualified
------------- ----------------
Te1/0/9
Yes
Te1/0/11
Yes
Te1/0/13
N/A
Te1/0/15
No
Te1/0/17
No
The following example shows static parameters of the optics along with the
qualifications status.
console#show interfaces transceiver properties
Yes: Dell Qualified
N/A : Not Applicable
Port
Type
------------ ------- --------------- -------------------- --------------
Te1/0/9
SFP+
Te1/0/11
SFP+
Te1/0/13
SFP
Te1/0/15
SFP+
Te1/0/17
SFP+
show statistics
Use the show statistics command to display detailed statistics for a specific
port or for the internal CPU interface.
Syntax
show statistics {gigabitethernet unit/slot/port |switchport | port-channel
port-channel-number | tengigabitethernet unit/slot/port |
fortygigabitethernet unit/slot/port}
•
unit/slot/port—A valid physical interface identifier. See
Conventions
•
port-channel-number—A port channel identifier.
•
switchport—Displays statistics for the internal switch CPU interface.
No: Not Qualified
Media
10GBASE-LRM
10GBASE-LRM
1GBASE-SX
10GBASE-SR
10GBASE-SR
for interface representation.
Serial Number
ANF0L5J
ANF0L5R
PCC1PT5
AD1125A002R
AD0815E00PC
Layer 2 Switching Commands
Dell Qualified
Yes
Yes
N/A
No
No
Interface Naming
409