Table of Contents
Advertisement
console(config-cfm-mdomain)#
service
Use the service command in Maintenance Domain Configuration mode to
associate a VLAN with a maintenance domain. Use the no form of the
command to remove the association.
Syntax
service service-name vlan vlan-id
•
service-name—Unique service identifier.
•
vlan-id—VLAN ID representing a service instance that is monitored by
this maintenance association. The range is 1-4093.
Default Configuration
No VLANs are associated with a maintenance domain by default.
Command Mode
Maintenance Domain Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config-cfm-mdomain)#service serv1 vlan 10
ethernet cfm cc level
Use the ethernet cfm cc level command in Global Configuration mode to
initiate sending continuity checks (CCMs) at the specified interval and level
on a VLAN monitored by an existing domain. Use the no form of the
command to cease send CCMs.
Syntax
ethernet cfm cc level 0-7 vlan vlan-id interval secs
Layer 2 Switching Commands
426
Advertisement
Table of Contents
