Dell N1100-ON Reference Manual page 183

Command
ipv6 pim bsr-border
ipv6 pim bsr-candidate
ipv6 pim dense-mode
ipv6 pim dr-priority
ipv6 pim hello-interval
ipv6 pim join-prune-interval
ipv6 pim register-threshold
ipv6 pim rp-address
ipv6 pim rp-candidate
ipv6 pim sparse-mode
ipv6 pim ssm
show ipv6 pim
show ipv6 pim bsr-router
show ip mroute group
show ip mroute source
show ipv6 pim interface
Description
Prevents bootstrap router (BSR) messages from
being sent or received through an interface.
Configures the router to announce its
candidacy as a bootstrap router (BSR).
Administratively configures PIM dense mode
for IPv6 multicast routing.
Sets the priority value for which a router is
elected as the designated router (DR).
Administratively configures the PIM-SM Hello
Interval for the specified interface.
Administratively configures the interface
join/prune interval for the PIM-SM router.
Configures the Register Threshold rate for the
RP router to switch to the shortest path.
Statically configures the Rendezvous Point (RP)
address for one or more multicast groups.
Configures the router to advertise itself as a
PIM candidate rendezvous point (RP) to the
bootstrap router (BSR).
Administratively configures PIM sparse mode
for multicast routing.
Defines the Source Specific Multicast (SSM)
range of multicast addresses.
Displays global status of IPv6 PIMSM and its
IPv6 routing interfaces.
Display the bootstrap router (BSR)
information.
Displays the multicast configuration settings
Displays the multicast configuration settings
Displays interface config parameters.
Dell EMC Networking CLI
a
Mode
IC
GC
GC
IC
IC
IC
GC
GC
GC
GC
GC
PE or
GC
UE,
PE, or
GC
PE
PE
PE or
GC
183