Dell N1100-ON Reference Manual page 579

User Guidelines
The following information is displayed.
Field
Port
Keep Alive
Loop Detected
Loop Count
Time Since Last Loop
Rx Action
Port Status
Command History
Implemented in version 6.3.0.1 firmware.
Example
console#show keepalive statistics gi1/0/3
Keep
Port Alive
-------- --------- ----------- -------- ------------- ------------- --------
Gi1/0/3 Yes
Description
The interface identifier.
Are keepalives transmitted on this interface (Yes,
No)?
Has a loop been detected (Yes, No)?
The number of CTP packets detected.
The last time a loop was detected.
Action when a loop is detected (Error disable, Log).
Current port status (Enable, Disable).
Loop Loop
Detected Count
No
Time Since Rx
Last Loop Action
Error disable Enable
Layer 2 Switching Commands
Port
Status
579