Dell N1100-ON Reference Manual page 140

Command
primary
priority
radius-server attribute 4
radius-server attribute 6
radius-server attribute 8
radius-server attribute 25
radius-server attribute 31
radius-server deadtime
radius-server host
radius-server key
radius-server retransmit
radius-server source-ip
radius-server source-
interface
Description
Specifies that a configured server should be the
primary server in the group of authentication
servers which have the same server name.
Specifies the order in which the servers are to be
used, with 0 being the highest priority.
Sets the network access server (NAS) IP address
for the RADIUS server.
Enables the switch to send the RADIUS
Service-Type attribute in authentication
messages sent to the authentication server.
Enables the switch to send the RADIUS
Framed-IP-Address attribute in authentication
messages sent to the authentication server.
Globally enables the switch to send the
RADIUS Class attribute as supplied by the
RADIUS server in accounting messages sent to
the accounting server.
Globally enables the switch to send the
RADIUS Class attribute as supplied by the
RADIUS server in accounting messages sent to
the accounting server.
Improves RADIUS response times when servers
are unavailable. Causes the unavailable servers
to be skipped.
Specifies a RADIUS server host.
Sets the authentication and encryption key for
all RADIUS communications between the
switch and the RADIUS daemon.
Specifies the number of times the software
searches the list of RADIUS server hosts.
Specifies the source IP address used for
communication with RADIUS servers.
Selects the interface from which to use the IP
address in the source IP address field of
transmitted RADIUS packets.
Dell EMC Networking CLI
a
Mode
R
R
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
140