Dell N1100-ON Reference Manual page 181

Command
ip pim
ip pim bsr-border
ip pim bsr-candidate
ip pim dense-mode
ip pim dr-priority
ip pim hello-interval
ip pim join-prune-interval
ip pim rp-address
ip pim rp-candidate
ip pim sparse-mode
ip pim ssm
show ip multicast
show ip pim boundary
show ip multicast interface
show ip mroute
Description
Administratively configures PIM mode for IP
multicast routing on a VLAN interface.
Administratively disables bootstrap router
(BSR) messages from being sent or received
through an interface.
Configures the router to advertise itself as a
bootstrap router (BSR).
Administratively configures PIM dense mode
for IP multicast routing.
Administratively configures the advertised
designated router (DR) priority value.
Administratively configures the PIM Hello
messages on the specified interface.
Administratively configures the frequency of
join/prune messages on the specified interface.
Defines the address of a PIM RP for a specific
multicast group range.
Configures the router to advertise itself to the
bootstrap router (BSR) as a PIM candidate
rendezvous point (RP) for a specific multicast
group range.
Administratively configures PIM sparse mode
for IP multicast routing.
Administratively configures PIM Source
Specific Multicast (SSM) range of addresses for
IP multicast routing.
Displays the system-wide multicast
information.
Displays the system-wide multicast
information.
Displays the multicast information for the
specified interface.
Displays a summary or all the details of the
multicast table.
Dell EMC Networking CLI
a
Mode
IC
IC
GC
GC
IC
IC
IC
GC
IC
GC
GC
PE
PE
PE
PE
181