Denial Of Service; Management Acl - Dell N1100-ON Reference Manual

Denial of Service

Command
dos-control firstfrag
dos-control icmp
dos-control l4port
dos-control sipdip
dos-control tcpflag
dos-control tcpfrag
rate-limit cpu
show dos-control
show system internal
pktmgr
storm-control broadcast
storm-control multicast
storm-control unicast
a. For the meaning of each Mode abbreviation, see

Management ACL

Command
deny (management)
management access-class
Description
Enables Minimum TCP Header Size Denial of
Service protection.
Enables Maximum ICMP Packet Size Denial of
Service protections.
Enables L4 Port Denial of Service protection.
Enables Source IP Address = Destination IP
Address (SIP=DIP) Denial of Service protection.
Enables TCP Flag Denial of Service protections.
Enables TCP Fragment Denial of Service
protection.
Configures the rate in packets-per-second for the
number of IPv6 data packets trapped to CPU
when the packet fails to be forwarded in the
hardware due to unresolved hardware address of
the destined IPv6 node.
Displays Denial of Service configuration
information.
Displays the configured CPU rate limit for
unknown packets in packets per second.
Enables Broadcast storm control.
Enables the switch to count Multicast packets
together with Broadcast packets.
Enables Unicast storm control.
Description
Defines a deny rule.
Defines which management access-list is used. GC
Mode Types.
Dell EMC Networking CLI
a
Mode
GC
GC
GC
GC
GC
GC
GC
PE
PE
IC
IC
IC
a
Mode
MA
147