Dell N1100-ON Reference Manual page 131

Command
spanning-tree portfast
bpdufilter default
spanning-tree portfast
default
spanning-tree port-priority
(Interface Configuration)
spanning-tree priority
spanning-tree tcnguard
spanning-tree transmit hold-
count
spanning-tree uplinkfast
spanning-tree vlan
spanning-tree vlan forward-
time
spanning-tree vlan hello-
time
spanning-tree vlan max-age
spanning-tree vlan root
spanning-tree vlan priority
a. For the meaning of each Mode abbreviation, see
UDLD
Command
udld enable (Global
Configuration)
Description
Discards BPDUs received on spanningtree ports
in portfast mode.
Enables portfast mode on all ports.
Configures port priority.
Configures the spanning tree priority.
Prevents a port from propagating topology
change notifications.
Set the maximum number of BPDUs that a
bridge is allowed to send within a hello time
window (2 seconds).
Configures the rate at which gratuitous frames
are sent after a switchover to an alternate port
and enables Direct Link Rapid Convergence.
Enables per VLAN spanning tree on a VLAN.
Configures the spanning tree forward delay time
for a specified VLAN or a range of VLANs.
Configures the spanning tree hello time for a
specified VLAN or a range of VLANs.
Configures the spanning tree maximum age
time for a set of VLANs.
Configures the switch to become the root
bridge or standby root bridge.
Configures the bridge priority of a VLAN.
Mode
Description
Globally enable UDLD. UDLD must be
globally enabled and enabled on an interface to
operate.
Types.
Dell EMC Networking CLI
a
Mode
GC
GC
IC
GC
IC
GC
GC
GC
GC
GC
GC
GC
GC
a
Mode
GC
131