Dell N1100-ON Reference Manual page 592

User Guidelines
There are no user guidelines for this command.
Command History
Introduced in 6.2.0.1 firmware.
Updated in 6.3.0.1 firmware.
Example
console# show vpc consistency-parameters global
Parameter
---------------------
STP Mode
STP Version
BPDU Filter Mode
BPDU Guard Mode
MST Instances
FDB Aging Time
VPC System MAC Address
VPC System Priority
VPC System MAC Address
VPC System Priority
VPC Domain ID
MST VLAN Configuration
Instance Associated VLANs
------------- -----------------------------------
1 7,8,10,20
2 4,5,40-50
4 30,32,34-38
RSTP-PV Configuration
Direct Rapid Convergence:
DRC Update Rate:
Indirect Rapid Convergence:
VLAN STP
Mode
----- --------
4 Enabled
switch# show vpc consistency-parameters interface port-channel 2
Value
-------------------------------------------
Enabled
IEEE
Enabled
Enabled
1,2,4
300 seconds
<AA:BB:CC:DD:EE:FF>
32767
00:1E:C9:DE.A2:08
32767
1
Enabled/Disabled
<0-32000> per second
Enabled/Disabled
STP Hello
Root Time
------- -----
Primary 2
802.1s
Forward Maximum
Time Age
------- -------- ---------
15 15
Layer 2 Switching Commands
Priority
0
592