Dell N1100-ON Reference Manual page 143

Command
dot1x timeout guest-vlan-
period
dot1x timeout quiet-period
dot1x timeout re-authperiod
dot1x timeout server-
timeout
dot1x timeout supp-timeout
dot1x timeout tx-period
auth-type
client
ignore
port
server-key
show dot1x
show dot1x authentication-
history
Description
Sets the number of seconds that the switch
waits before authorizing the client if the client
is a dot1x unaware client.
Sets the number of seconds the switch remains
in the quiet state following a failed
authentication attempt.
Sets the number of seconds between
reauthentication attempts.
Sets the number of seconds the switch waits for
a response from the authentication server
before resending the request.
Sets the time that the switch waits for a
response before retransmitting an Extensible
Authentication Protocol (EAP)-request frame
to the client
Sets the number of seconds the switch waits for
a response to an EAP-request/identify frame
from the client before resending the request.
Set the accepted authorization types for
dynamic RADIUS clients.
Sets the CoA client parameters.
Sets the switch to ignore certain authentication
parameters from dynamic RADIUS clients.
Sets the port on which to listen for CoA and
disconnect requests from authorized dynamic
RADIUS clients.
Configures a global shared secret that is used for
all dynamic RADIUS clients that do not have an
individual shared secret configured.
Displays 802.1X status for the switch or the
specified interface.
Displays the dot1x authentication events and
information during successful and unsuccessful
dot1x authentication processes.
Dell EMC Networking CLI
a
Mode
IC
IC
IC
IC
IC
IC
DRC
DRC
DRC
DRC
DRC
PE
PE
143