Ethernet Configuration - Dell N1100-ON Reference Manual

Command
ip arp inspection validate
ip arp inspection vlan
permit ip host mac host
show arp access-list
show ip arp inspection
12 Enabled Disabled
a. For the meaning of each Mode abbreviation, see

Ethernet Configuration

Command
clear counters
description
flowcontrol
interface
interface range
link debounce time
Description
Enables additional validation checks like source
MAC address validation, destination MAC
address validation or IP address validation on
the received ARP packets.
Enables Dynamic ARP Inspection on a single
VLAN or a range of VLANs.
Configures a rule for a valid IP address and
MAC address combination used in ARP packet
validation.
Displays the configured ARP ACLs with the
rules.
Displays the Dynamic ARP Inspection
configuration.
Displays the Dynamic ARP Inspection
configuration on all the VLANs in the given
VLAN range.
Mode
Description
Clears statistics on an interface or globally.
Adds a description to an interface.
Configures the flow control on a given interface. GC or
Enters the interface configuration mode to
configure parameters for an interface.
Enters the interface configuration mode to
execute a command on multiple ports at the
same time.
Configures the debounce timer for one or
multiple interfaces.
Types.
Dell EMC Networking CLI
a
Mode
GC
GC
ARPA
PE
PE
PE
a
Mode
PE
IC
IC
GC or
IC
GC or
IC or
IR
IC or
IR
109