Address Table - Dell N1100-ON Reference Manual

Table of Contents

Advertisement

Command
remark
service-acl input
show access-lists interface
show service-acl interface
show ip access-lists
show mac access-lists
a.
For the meaning of each Mode abbreviation, see

Address Table

Command
clear mac address-table
mac address-table aging-
time
mac address-table multicast
forbidden address
mac address-table static vlan
switchport port-security
(Interface Configuration)
show mac address-table
show mac address-table
address
Description
Adds a comment to an ACL rule.
Blocks Link Local Protocol Filtering (LLPF)
protocol(s) on a given port.
Displays interface ACLs.
Displays the status of LLPF rules configured on
a particular port or on all the ports.
Displays an Access Control List (ACL) and all
of the rules that are defined for the ACL.
Displays a MAC access list and all of the rules
that are defined for the ACL.
Mode
Description
Removes any learned entries from the
forwarding database.
Sets the address table aging time.
Forbids adding a specific multicast address to
specific ports.
Registers MAC-layer multicast addresses to the
bridge forwarding table, and adds static ports to
the group.
Disables new address learning on an interface.
Displays dynamically created entries in the
bridge-forwarding database.
Displays all entries in the bridge-forwarding
database for the specified MAC address.
Types.
Dell EMC Networking CLI
a
Mode
IPAF4,
IPAF,
ML,
ARPA
IC
PE
PE
PE
PE
a
Mode
PE
GC
GC
GC
IC
PE
UE or
PE
104

Advertisement

Table of Contents
loading

This manual is also suitable for:

N1500N3100-onN4000N2100-onN2000N3000

Table of Contents