Dell N1100-ON Reference Manual page 100

Table 1-1. System Command Groups (continued)
Command Group
CLI Macro
Clock
Command Line
Configuration Scripting
Configuration and Image
Files
DHCP Client
HiveAgent
Line
PHY Diagnostics
Power Over Ethernet
(PoE)
RMON
Serviceability Tracing
sFlow
SNMP
Syslog
System Management
Telnet Server
Time Ranges
USB Flash Drive
User Interface
Description
Configures CLI Macro and displays CLI Macro
information.
Configures the system clock.
Manages the switch configuration files.
Manages file system and Command Line Interface
scripting commands.
Configures an interface to obtain an IP address via DHCP.
Enables configuration of the Dell HiveAgent
Configures the console, SSH, and remote Telnet
connection.
Diagnoses and displays the interface status.
Configures PoE and displays PoE information.
Can be configured through the CLI and displays RMON
information.
Controls display of debug output to serial port or telnet
console.
Configures sFlow monitoring.
Configures SNMP communities, traps and displays SNMP
information.
Manages and displays syslog messages.
Configures the switch clock, name and authorized users.
Configures Telnet service on the switch and displays
Telnet information.
Configures time ranges and displays time range
information.
Configures USB flash drive and displays USB flash drive
information.
Describes user commands used for entering CLI
commands.
Dell EMC Networking CLI
100