Green Ethernet - Dell N1100-ON Reference Manual

Command
show ethernet cfm
maintenance-points local
show ethernet cfm
maintenance-points remote
show ethernet cfm statistics
a. For the meaning of each Mode abbreviation, see

Green Ethernet

Command
clear counters
green-mode eee
description
green-mode eee-lpi-history
show green-mode interface-
id
Description
Displays the configured local maintenance
points.
Displays the configured remote maintenance
points.
Displays the CFM statistics.
Mode
Description
Enables a Dell EMC proprietary mode of power
reduction on ports that are not connected to
another interface.
Enables EEE low power idle mode on an
interface or all the interfaces.
Clears:
• The EEE LPI event count, and LPI duration
• The EEE LPI history table entries
• The Cumulative Power savings estimates
for a specified interface or for all the interfaces
based upon the argument.
Configures the Global EEE LPI history
collection interval and buffer size. This value is
applied globally on all interfaces on the stack.
Displays the green-mode configuration and
operational status of the port. This command is
also used to display the per port configuration
and operational status of the green-mode. The
status is shown only for the modes supported on
the corresponding hardware platform whether
enabled or disabled.
Types.
Dell EMC Networking CLI
a
Mode
PE
PE
PE
a
Mode
IC
IC
PE
GC
PE
112