Bridge 14 Display - Ports On The Bridge - Zhone IMACS 8000 User Manual

Running Head
Analog Bridge Server Card User Screens and SettingsAnalog Bridging Serv-
Figure 20-8.Bridge 14 display - ports on the bridge
To remove a participant and the resource from a bridge, you must use the delete function at
the All ports level. From the All ports level, the user can either set the bridge number on the
ports to be removed to zero (00), or use the delete command to remove them from the bridge.
This is illustrated below in Figure 20-9, where logUNIT port 6 shows no assignment in any
bridge, as circled. This action makes this logical port ready for assignment into another bridge,
and as can be seen below - all other ports here are part of bridges and taking up bridge
resources. Logical ports 7 and 8 below are still active participants on bridge number 05, even
though they are in standby mode.
20-12
Model No.
Server Cards