Zhone IMACS 8000 User Manual page 681

Current CPU does not support redundancy.
The selected CPU card does not support redundancy. If the system has two CPUs, be sure they
are both 8803s.
D-channel is active.
You cannot change WAN parameters because ISDN D-channel associated with it is still active.
Dialing is not available with Alarm Card.
If an External Alarm card is present in the system, you cannot use dial triggers for the HSU
card. Remove the External Alarm card first.
Do you want to send long test syslog(y/n)?
Prior to the system generating a long test syslog message, confirmation is required.
Download failed. Exit screen and try again
An attempt to download the IPR*4 card failed, likely due to a communications error.
Download failed. Try again later
An attempt to download the IPR*4 card failed, likely due to a checksum failure.
Do you want to send test syslog(y/n)?
Prior to the system generating a test syslog message, confirmation is required.
ds0-n available only with 64K rate.
You cannot generate a DS0 time slot (ds0-n) loopback on an OCU-DP port with a data rate of
less than 64 kbps. This is possible only on ports operating at 64 kbps and higher.
Duplicate prt report element.
You have asked the Print Alarms option to print the same element twice.
Reference Guide B-7