Cross-Connect (Xcon); E1 Cross-Connect Screen (Display Only) - Zhone IMACS 8000 User Manual

Running Head
WAN Card User Screens and Settings
9.4.3

Cross-Connect (XCON)

The Cross-Connect (Xcon) command in the Main WAN screen allows you to view the time
slot or DS0 assignments that have been set up in the system. Highlight the WANs on the card
and press the "x" (Xcon) to select Cross-Connect. Either an E1 screen (Figure 9-20) or a T1
screen (Figure 9-21) will appear, depending upon the WAN highlighted. This is a display-only
screen. Time slot and cross-connect configuration are discussed in the System Operations
chapter of this manual.
Figure 9-20.E1 Cross-Connect Screen (display only)
9-36
Model No.
WAN Card
System Cards