Highlighted Circuit On A Wan Cross-Connect Screen - Zhone IMACS 8000 User Manual

System Configuration and Operation
Figure 5-56 shows the WAN Cross-Connect Screen for the voice circuit used in this example.
Place the cursor over the selected circuit and press the "t" key to bring up the Test Screen
shown in Figure 5-57. This screen now splits the circuit into two parts, with the location acting
as the midpoint. The first column of test parameters will apply to that portion of the circuit on
port w2-1, time slot 13. The second column of test parameters will apply to that portion of the
circuit on port w2-2, time slot 13.
Table 5-11 lists the test parameters and their available and default values.
Figure 5-56.Highlighted Circuit on a WAN Cross-Connect Screen
Reference Guide
Testing Voice Cross-Connects
5-69