Ascii Restore Procedure; Xmodem 128K And Xmodem 1K Backup - Zhone IMACS 8000 User Manual

System Configuration and Operation

5.12.9 ASCII Restore Procedure

Follow the steps listed below to perform an ASCII restore.
1. From the main menu press "Y" for System.
2. Press "E" for Restore.
3. Select "ascii" from the Protocol selection using the arrow keys to navigate. Press Enter.
4. Press "G" for Go.
5. From the Terminal Emulation Screen Menu select Send Text File. The system prompts
for the filename and path. Following entry of appropriate information, the restore process
begins. If a process completed message appears immediately following the start of the
process, an error has occurred. If this happens, check to ensure that the file being sent to
the system includes a.TXT extension.
6. Upon completion of restoration, the system prompts you to press ESC twice. The system
then reboots itself.
7. Following reboot, press "Y" for Yes when prompted. The system configuration
information should be restored.

5.12.10 XMODEM 128k and XMODEM 1k Backup

Follow the steps listed below to perform an XMODEM 128k or XMODEM 1k backup. (Note
that XMODEM 128k is slower than XMODEM 1k.)
1. Log into the Integrated Access System on which the backup is to be performed.
2. Press "Y" for System at the main menu.
3. When the Test and Debug screen appears, press "B" for Backup.
4. The NV Ram Backup screen next appears. Using the arrow keys to navigate the cursor,
highlight the Protocol selection and press Enter.
5. Select xmodem using the arrow keys and press Enter.
Note: New in CPU 7.x.y is that we will automatically write the active database to flash first.
Reference Guide
System Level Maintenance
5-35