Pwe Card Main Screen - Zhone IMACS 8000 User Manual

System Configuration and Operation
To choose a redundant
1. From the System Main Screen select the desired
the Main Screen of that card. Figure 5-85
3. Highlight the STATE parameter of the
the arrow key to select rdnt from the options, and return once it is high-lighted as
illustrated above in Figure 5-85. This will change the STATE setting to rdnt, and then
save the change. No parameters need to be change or filled in, as upon a PWE card switch
all the active card settings will be transferred to the rdnt.
Reference Guide
Figure 5-89.PWE Card Main Screen
PWE
card for the system, proceed as follows:
PWE Card Redundancy
PWE
card and press <Enter> to go to
shows the card in slot P3 is chosen.
1
PWE
card, and press the <Enter> key. Then use
5-107