Two-Port Hsu Card Jumper/Switch Settings; Installing The Two-Port Hsu 530/35 Card; Two-Port Hsu 530/35 Card Switches - Zhone IMACS 8000 User Manual

Running Head
HSU Card Description

14.2.1.1 Two-Port HSU Card Jumper/Switch Settings

The HSU 530/35 Card has two slide switches that you must set for either RS-530 or V.35
interfacing on its data ports. Figure 14-1 shows these switches, which are factory-set to
RS-530 operation (up positions) for both ports. To change a card port for V.35 operation, reset
its associated switch to the down position.
HSU*2
530/35
HSU RS530/V.35
Port #1
P
1
HSU RS530/V.35
Port #2
P
2

14.2.1.2 Installing the Two-Port HSU 530/35 Card

Install the Two-Port HSU 530/35 Card into any user card slots. These slots are U1 to U8 on
the two-sided chassis and front-loading chassis with power supplies on top, or P1 to P4 and
W1 to W4 on the front-loading chassis with power supplies on the side.
14-2
RS-530
V.35
RS-530
V.35
Figure 14-1.Two-Port HSU 530/35 Card Switches
Model No.
HSU Card
Power
Bus
Edge
Connector
Data Cards