Zhone IMACS 8000 User Manual page 374

Running Head
E&M Card User Screens and Settings
Tx ABCD
The Transmit ABCD information field shows the current values of the ABCD bits that are
being transmitted to the network. If TX ABCD in the top half of the screen is changed via the
set function mentioned above, and the settings are saved by the Save command in the Test
Screen, the new bit pattern chosen will be reflected here.
Rx ABCD
The Receive ABCD information field shows the current values of the ABCD signaling bits
that are received from the network. If RX ABCD in the top half of the screen is changed via
the set function mentioned above, and the settings are saved by the Save command in the Test
Screen, the new bit pattern chosen will be reflected here.
E-Lead
The E-lead information field shows the current status of the E-lead of this port. The settings
are either on or off.
M-Lead
The M-lead information field shows the current status of the M-lead of this port. The settings
are either on or off.
MODE
The Mode informational field shows the current mode of the port that was selected on the main
E&M card screen. Valid settings are e&m, to, e&mR2, and R2mod.
STATUS
The Status information field shows the current status of the port. Table 11-7 describes the
conditions reported by this field.
11-14
Model No.
E&M Card
Voice Cards