Backup And Restore Circuit Name Table; Nvram Backup Screen - Zhone IMACS 8000 User Manual

System Configuration and Operation

5.17.2 Backup and Restore Circuit Name Table

The circuit name table can be backed up and restored via NBR, adding additional flexibility
for managing circuit names.
Note: If a different version host CPU is used after circuit names have been renamed, the
changed circuit names are maintained until a resource is changed, at which time the
circuit name is restored to default. The names table will only hold names changed
from the circuit's original name. If no circuits are changed, the circuit name table will
remain empty and the names originally assigned to the circuit upon activation will be
used.
When TFTP is used or NVRAM is backed up to FLASH, entire NVRAM is saved, including
the circuit name table. When ascii is selected, the circuit name table as Xcon Names has been
added to the selection list as shown in the figure below.
Note: A customer desiring to backup the contents of the IMACS onto an off-site node should
always backup the current configuration to flash first! This will update the
information that will be sent during the backup procedure.
Reference Guide
Figure 5-31.NVRAM Backup Screen
Circuit Names
5-47