Status Information Field Settings - Zhone IMACS 8000 User Manual

FXS Card
STATUS
The Status field shows the current status of the port. Table 12-9 lists and describes all of the
possible conditions reported by this field.
Setting
stdby The FXS port is in standby.
W stb WAN card to which the FXS port is assigned is in standby.
W tst WAN card to which the FXS port is assigned is under test.
W OOS WAN card to which the FXS port is assigned is out of service.
noWAN There is no WAN card configured in the slot to which the FXS port is
assigned.
call Call set-up is in progress.
busy Call is in progress.
idle No call is in progress (port is available for a call).
TC The port is in Trunk Conditioning because a CGA alarm occurred on the
associated WAN port.
test A test is in progress on the port (i.e., you are actively controlling the circuit
by setting values for Tx ABCD or Rx ABCD).
maint The port is in a maintenance condition.
Voice Cards
Table 12-9. Status Information Field Settings
FXS Card User Screens and Settings
Meaning
12-17