Zhone IMACS 8000 User Manual page 222

Running Head
CPU Card User Screens and Settings
SYS CONT
In this field, enter the name of a person to contact for questions about the Integrated Access
System. This field can have up to 23 alphanumeric characters, including spaces. For
convenience, use the system administrator's name in this field.
SYS LOC
In this field, specify the location of the Integrated Access System. This field can have up to 23
alphanumeric characters, including spaces.
SYS PH#
Type the phone number of the Integrated Access System in this field. This phone number is
used by a remote operator to access the system for a VT-100 session, via either ISDN
D-channel dialing or a Remote IMACS Terminal System (RITS). You can enter up to 10
numeric characters in this field. However, do not include any dashes in this entry.
ALRM SEQ
The Alarm Sequence setting establishes how the sequence number for alarms is generated. Set
this option to all if you want any alarm generated by the system to be assigned a sequence
number. Or, set this field to report if you want only the alarms set to report to have sequence
numbers.
ACO
The Alarm Cutoff (ACO) option reports a status to you based on the latch (condition held) or
cur (current condition) setting.
FCR
FCR stands for Fast Circuit Restore, and will allow traffic circuits to restore activity after a T1
line failure faster than what is recommended in the T1 specification. This feature may have
applications in 'protective relaying circuits', assuming that random data received during the
period of the outage is acceptable
With FCR Off - Default
Integrated Access System operation follows the standard requirements of service restoration
for failures If a T1 line or WAN card fails, the system will generate either a red or yellow alarm
and will clear CGA-RED and CGA-YEL alarms per standard definitions.
7-12
Model No.
CPU Card
System Cards