Main Screen Actions; Main Screen Option Settings And Defaults - Zhone IMACS 8000 User Manual

LDSRU-10P Card
Action
Save
Undo
Refresh
Copy
Test
Main
Table 16-2 lists the SRU Card Main Screen parameters and available option settings.
Table 16-2. Main Screen Option Settings and Defaults
Parameter
STATE stdby
WAN/SRV none wan (w1-1 through w4-2) serv (P1 through P3)
TS 01-24
FRAME a
RATE .3
SR TS n/a
INTF asyn
8
COM CF 1
none
CTS perm
TX CLK n/a
LB off
LB GEN n/a
LB DET n/a
DL OPT off
ADPCM n/a
MAJ ERR off
Notes:
1. Time slot 16 is not available if the port is assigned to an E1 WAN link whose TS 16 is
programmed for cas or ccs.
2. Although offered as frame options, b-10, b-20 and x.50 are not supported. Additionally.
b-5 circuits must be confined onto two groups: 1 through 5 and 6 through 10.
Data Cards
LD-SRU Card User Screens and Settings
Table 16-1. Main Screen Actions
Saves changes to settings.
Returns all settings to the last saved state.
Updates certain time-related information fields that are not automatically
updated (i.e., test status).
Copies the contents of the current column to the next column. Useful if you
change a lot of entries in one column and want to repeat those changes in
subsequent columns.
Initiates and monitors testing of all SRU card ports. Refer to the Test section
of this chapter.
Returns to the System Main Screen. If changes are made to settings and not
saved, you will be prompted to save or lose changes.
User Options
act
01-31
b-5 b-10 b-20 x.50
1.2 2.4 4.8 9.6
1 1-5 1-10 1-20
sync v.14
7 6 5
2
odd even space
l0 l30 l60 l100
int ext
dte net
off ocu csu dsu
w/to on off
on
P1 P2 P3
on none 10e-3 10e-4
Function
adpcm hlink nlink
14.4 19.2 28.8 38.4
mark
rl0 rl3 rl6 rl10
10e-5 10e-6 10e-7 6
Notes Default
stdby
w1-1
1 01
2 a
3 .3
1
asyn
8
4 1
none
off perm
n/a
off
off
off
5 n/a
n/a
off
16-5