Example; Master Dialing; Mux Call Screen Actions - Zhone IMACS 8000 User Manual

Running Head
HSU Card User Screens and Settings
Parameter Parameter
Name Number
DChan 01
Called # 02
Called # Type 03
Called # Plan 04
Channel Rate 05
Rate Multiplier 06
IMUX Call 07
Service 08
Calling # 09
Calling # Type 10
Calling # Plan 11
Present. Indctr 12
Screen. Indctr 13
If the IMUX Call is yes, the selection for Channel Rate will be 01=56, 02=64 and 03=H0. If
the IMUX Call is used, the selections for Rate Multiplier will be 02-30 for 56/64 and 2-3 for
H0.

14.3.14.1 Example

The command, *64122, sets the current value of Present. Indctr to no.
The command, *640303, sets the Called Number TYpe to sbscr. Call Profile changes
permanently alert the active call profile for this HSU port.
The information presented in this section is listed in the RS366 dialing matrix shown in Table
14-18.

14.3.15 Master Dialing

Master Dialing, discussed previously, is another unique application for RS366 dialing for the
system when using an 8213 HSU RS366 dialing port to dial for any other HSU card in the
system. A different command string is used to make these changes.
The command string is: [escape character] [35] [slot number] [port number], where "slot
number is the user card (1-8) and "port number" is the port in that slot to which subsequent
dialing commands should be applied.
The command: *3511, would indicate that the next series of commands would apply to port
#1 of the HSU card in slot U1.
14-44
Table 14-17. MUX Call Screen Actions
a number from 01-08
4 through 25 numeric characters can be entered
01=natnl, 02=intnl, 03=sbscr
01=unkwn, 02=isdn, 03=phone, 04=print
01=56u, 02=56r, 03=64u, 04=64r, 05=364u, 06=364r, 07=1536r, 09=MRate
02-24 (only available if MRate is chosen)
01=no, 02=yes
01=first billing plan, 02=second billing plan, etc.
4 through 25 numeric characters can be entered
01=natnl, 02=intnl, 03=sbscr
01=unkwn, 02=isdn, 03=phone, 04=print
01=yes, 02=no
01=up-ns
Parameter Value
Model No.
HSU Card
Data Cards