Running Head
DS0-DP Card User Screens and Settings
18.3 DS0-DP Card User Screens and Settings
18.3.1 DS0-DP Card Main Screen
You must configure the DS0-DP card for operation. This is done from the DS0-DP Card Main
Screen, which is shown in Figure 18-1. To go to that screen, highlight the desired card in the
System Main Screen and press <Enter>.
The bottom highlighted line of this screen shows several actions you can perform from the
screen. To perform an action, simply press the key indicated by the uppercase letter of the
desired action. For example, to save your configuration settings, press "s". Table 18-1 lists
these actions, and Table 18-2 summarizes the DS0-DP card parameters and available settings.
These are also described in the following paragraphs.
18-2
Figure 18-1.Typical DS0-DP Card Main Screen
Model No.
DS0-DP Card
Data Cards