Main Screen Actions; Main Screen Option Settings And Defaults - Zhone IMACS 8000 User Manual

Running Head
ACS-MCC Card User Screens and Settings
Action
Save
Undo
Refresh
Copy
<
>
porT (C1-C3) The port option allows you to "jump" to a specific port. Enter the number
Nstat
Main
Table 22-2. Main Screen Option Settings and Defaults
Parameter
STATE
IPADDR
NETMASK
DEF RT
RIP
SH
WEIGHT
FMT-MAIN
FMT-SUB
IF-TYPE
STATE
The State setting determines whether the port is active or inactive. Set the State to stdby
(standby) to disable the Ethernet port, or choose actv (active) to enable the port.
IPADDR
When configured for unnumbered interfaces, the IP Address setting identifies the global IP
Address of the MCC. This address is thus valid regardless of the state of the Ethernet port.
When configured for numbered interfaces, the IP address of the Ethernet port identifies the IP
address of the Ethernet interface only.
22-4
Table 22-1. Main Screen Actions
Saves changes to settings.
Returns all settings to the last saved state.
Redraws the screen.
Copies the contents of the current column to the next column. Useful if
you change a lot of entries in one column and want to repeat those changes
in subsequent columns.
The "less than" symbol scrolls backward through the 128 ports associated
with this card.
The "greater than" symbol scrolls forward through the 128 ports associated
with this card.
of the port you wish to see, press the <Enter> key, and the requested port
will be displayed. To return to the Main Screen, press "e" and then press
<Enter>.
Displays the Network Data Screen.
Returns to the System Main Screen. If changes are made to settings and
not saved, you will be prompted to save or lose changes.
User Options
stdby actv
ip
ip
none stat dyn
off rx tx rx/tx
off on
01-15
bxr hdlc
bxr hdlc
unnum num
Function
Model No.
MCC Card
Default
stdby
0.0.0.0
0.0.0.0
none
off
off
01
bxr
bxr
unnum
Server Cards