Ipr*4 Port Screen; Ipr*4 10/100Bt Arp Table Screen - Zhone IMACS 8000 User Manual

IPR*4 Router Card
The ARP screen will display when pressing the "A" (Arp) from the Ethernet screen. Figure
21-19 shows the ARP Table screen. This screen will display ARP Entries, Ethernet Addresses,
and the State in which each ARP entry (e.g GOOD, BAD, etc.).

21.10.5 IPR*4 Port Screen

Once the ethernet side of the IPR*4 card has been setup, then the PPP T1/E1 WAN link side
can be setup using the porT option from the IPR*4 anchor window. The card can support up
to 128 links, with the first four of these links having the ability to handle higher bandwidth.
Ports one through four can be assigned up to an entire T1 or E1 worth of bandwidth per port.
When using multiple DS0 timeslots on the first four ports, the selected DS0 ports must be
contiguous. The port interface for the IPR*4PPP shown in Figure 21-20.
Server Cards
IPR*4PPP Configuration Screens and Settings
Figure 21-19.IPR*4 10/100BT ARP Table Screen
21-31