PWE Card
24.4 PWE Card Error Messages
Refer to Appendix B in the System Reference Guide for further information on Error
Messages regarding this card.
Card ACTV;Cannot change IP,Mask,GW,Speed,Connector
Card does not respond
Card is being reset
Inner label must be unique
Invalid IP address
Invalid state for PWAN
Invalid TimeSlot
Invalid WAN/SRV
MEF ECID must be unique
No PWs exist cannot change state to active
Only 2 PWs may have adaptive clock enabled
Port is in use in XCs
Port is in use on OC3 card
Port is in use on PWE card
PROTOCOL must be MPLS to set MPLS OUTER LABEL on
PWAN must be in standby before making changes
PWE Switch Failed No ACT or RDNT card.
PWs exist cannot change mode
The IP ADDR and NET MASK must be set before PWAN set to active
Type must be PWAN before provisioning PW
Type must be PWAN to change state
UDP port must be unique
Server Cards
PWE Card Error Messages
24-15