Inverse Multiplexer (Imux) Screen; Imux Call Screen; Call Profile Broadcast Screen Actions - Zhone IMACS 8000 User Manual

Running Head
HSU Card User Screens and Settings
Table 14-12. Call Profile Broadcast Screen Actions
Action
Connect
Disconnect
Refresh
Main

14.3.7 Inverse Multiplexer (IMUX) Screen

The Inverse Multiplexer feature requires the installation of appropriate firmware. An
ISDN-PRI card is also required. The screens that follow will only appear when the system is
properly configured.
Figure 14-18 displays the IMUX screen. Table 14-13 lists the IMUX screen actions and Table
14-14 shows lists the available options with the settings and defaults.
14-36
If the call placed to one of the Broadcast phone numbers fails to connect,
this command will attempt to reconnect the call.
Breaks the connection of the number highlighted on the screen. The user
will be prompted with yes/no question before disconnecting.
Updates the connection status information.
Returns to the Call Profile screen.
Figure 14-18.IMUX Call Screen
Function
Model No.
HSU Card
Data Cards