Running Head
WAN Card Descriptions
WAN
DUAL
Figure 9-1.WAN DUAL Card with CSU Support (801070)
9.2.1.1
Card Jumper/Switch Settings
The 801070 card utilizes jumpers to set each of the two ports for T1, E1 or T1 CSU. These
straps are located in the "Area of Detail" as seen in Figure 9-1 on page 9-2, and shown in
greater detail in Figure 9-2.
The straps on the 801070 and 801470 are used instead of the previous daughter boards with
straps to set the line parameters on the 801060 and 801460 cards.
9-2
Area of Detail
Model No.
WAN Card
System Cards