Network Statistics Screens; Typical Network Statistics Screen - Zhone IMACS 8000 User Manual

Running Head
TCP/IP Network Management
7.4.2

Network Statistics Screens

The Network Statistics Screens provide maintenance and diagnostic information for the
different protocols supported by this equipment. The system starts accumulating statistics
when the TCP/IP Port is changed from off to local or wan, and it continues to store
information until it is turned off.
Figure 7-14 shows the first of four Network Statistics Screens, and Figure 7-15 through Figure
7-17 show the other three screens. To go to the first screen, press "n" in the TCP/IP Screen to
choose Netstat from the bottom line of that screen. Table 7-11 lists the actions that can be
taken from the Network Statistics Screens, and the following paragraphs describe the
parameters in each screen.
Figure 7-14.Typical Network Statistics Screen, Page 1
To move from one screen (page) to another, press "d" (pgDn) or "u" (pgUp). Pressing "d"
goes to the next-highest page number. If you are on Page 4 when you press "d", you will wrap
around to Page 1. Pressing "u" goes to the next-lowest page number. If you are on Page 1 when
you press "u", you will wrap around to Page 4.
7-28
Model No.
CPU Card
System Cards