Zhone IMACS 8000 User Manual page 683

Ethernet port must be active
An attempt has been made to use the xpress option to download the IPR*4 card with the
Ethernet port turned off.
Failed
Generation of a test syslog message failed, perhaps due to permissions error of the requestee
Field can NOT be MODIFIED.
You cannot edit this field.
FR circuit is not defined.
You cannot assign a user circuit for an undefined Frame Relay PVC.
FR port and DLCI must be unique.
The Frame Relay port and DLCI must form a unique address for each PVC.
FR port is not active.
You cannot activate a PVC on an inactive Frame Relay port.
Group 'A' is not allowed for slcd4.
You cannot use trunk group A in the slcd4 mode.
Group already taken.
This group is already assigned.
Illegal address and mask combination.
The combination of IP address and mask numbers you chose is invalid. Change either the IP
address or mask number.
Reference Guide B-9