Ipr*4 Card Configuration Screens And Settings; Imacs Main Screen; Ipr*4 Card Interactions - Zhone IMACS 8000 User Manual

IPR*4 Router Card

21.4 IPR*4 Card Configuration Screens and Settings

21.4.1 IMACS Main Screen

The IPR*4 card displays the four ethernet ports and their current status on the main login
screen. The WAN PPP or PPP link ports are not displayed at this level.
The IPR*4 card supports 8 multi-DS0 PPP WAN links. All eight of these WAN links can be
provisioned to transport a full T1 or E1 range of available DS0's. When utilizing these eight
high-speed links, the DS0 assignment must be contiguous. The IPR*4 card takes longer then
other IMACS server cards to initialize on power-up and restarts. As shown in Figure 21-3,
system interactions take longer when dealing with the IPR*4 card as in the case of accepting
the card from a rejected state (REJ). This particular action causes the user interface (UI)
updates to cease as the IMACS provisions and establishes the 8 PPP WAN link configuration.
The IMACS continues to operate during this time, however the UI cannot be updated until the
task completes.
Server Cards
IPR*4 Card Configuration Screens and Settings
Figure 21-3.IPR*4 card interactions
21-5