Zhone IMACS 8000 User Manual page 552

Running Head
Analog Bridge Server Card User Screens and SettingsAnalog Bridging Serv-
USER
This field can be chosen to add a participant from a User card, U1 through U8.
WAN
This field is used to choose to add to a bridge a WAN port. Available are WAN 1-1 through
WAN 4-2.
TS/PORT
This field is used to identify the timeslot (in the case of a WAN) or port in the case of a User
card that is assigned to the bridge. From 01 through 32. For user ports, 1 through 8 are
selectable. If WAN, then the maximum number will be 24 for T1, and 32 for E1 mode.
SIG MODE
The signaling mode is set to either E&M or TO. Currently signaling is not supported on the
bridge.
CODING
For future development. Currently u-law and a-law will be filled in if the subscriber is using
T1 or E1 mode, respectively.
SUB CHAN
For packed DS0's when using compression, the user can select the sub channel. Currently not
used.
RX MODE
The user can select half for full duplex mode. Half duplex prevents the user from hearing their
own input into the bridge, and is the default setting.
TX MODE
The TX mode is for future use, only na is available.
20-8
Model No.
Server Cards