Terminal Security; At" Commands Used By Rits - Zhone IMACS 8000 User Manual

Interface Card
8.3.4.4

Terminal Security

No user may log into any integrated access controller on the network without knowing the
individual password of each system.
Table 8-7 list the "AT" commands and the associated function. All "AT" commands are
followed by pressing the <ENTER> key.
AT Command
ATDTxxx
ATDTxxxR
ATDTxxxC
ATDTxxxH
ATDTxxxCH
+++
"L" (letter L)
xxx indicates the phone number on the CPU card of the desired system unit.
System Cards
Interface Card User Screens and Settings
Table 8-7. "AT" Commands Used by RITS
Establish a user interface connection.
Establish an alarm reporting connection. (Connection only lasts for
the length of time necessary to upload and display all alarms that
are being reported by the system that have not yet been displayed.)
Establish a current alarm reporting connection. (Connection only
lasts for the length of time necessary to upload and display all
active alarms that are being reported by the system.)
Establish a historical alarm reporting connection. (Connection only
lasts for the length of time necessary to upload and display the
alarm history reported by the system.)
Establish a current and historical alarm reporting connection.
(Connection only lasts for the length of time necessary to upload
and display the current alarms and alarm history reported by the
system.)
Disconnects a remote session.
Disconnects a remote session.
Function
8-21