Fdl Parameters - Zhone IMACS 8000 User Manual

Running Head
TCP/IP Network Management
Packets Dropped - Buffer
The Packets Dropped - Buffer field shows the number of incoming packets that were dropped
because there was not enough free memory to buffer them.
Buffer Overflow
The Buffer Overflow field shows the occurrences of buffer overflow at the local system.
Packets Sent Out
The Packets Sent Out field shows the number of packets transmitted by the local system to the
network host.
Bytes Sent Out
The Bytes Sent Out field shows the number of bytes transmitted to the network host by the
local system.
7.4.2.2

FDL Parameters

The FDL parameters also appear in the first Network Statistics Screen (Figure 7-14). They are
described below.
MTU Size
The MTU (Maximum Transmission Unit) Size field shows the largest number of bytes that
can be sent in a single frame. The default MTU is 240 bytes.
Frames Received
The Frames Received field shows the number of frames received by the local system from the
network host.
Frames Aborted on Receive
The Frames Aborted on Receive field shows the number of frames that were aborted when
received by the local system from the network host. Frames are aborted because they either
exceed the MTU or are not complete.
7-30
Model No.
CPU Card
System Cards