Zhone IMACS 8000 User Manual page 676

Model No.
Running Head
All blank prt report.
You chose the empty option setting for all four elements of the Print Alarm on the Interface
Card. This combination of settings is invalid and cannot be saved. Choose the proper option
settings for these elements.
ASYNC/5 databits must have 2 stop or parity.
You have assigned an SRU card port to an asynchronous circuit with 5 data bits, one stop bit,
and no parity. This is an invalid combination of option settings. Either choose two (2) stop bits,
or enable parity on that port.
ATM PHY is not active.
The physical ATM port is not active.
B-channels must be allocated.
You are trying to activate an ISDN PRI D-channel that has no assigned B-channels. Assign
B-channels to the D-channel.
Bad routing format.
The telephone numbers used for the ISDN-PRI routing table are not formatted correctly.
Re-enter these numbers in the proper format.
Bad Service number format.
ISDN-PRI Server numbers must have two digits. The valid service number range is from 01
to 99.
BCH is not supported in XCON.
You cannot use BCH error correction on an OCU-DP card in systems with cross-connect
WAN cards.
block number mismatch.
The user has downloaded code to a card, and tried to activate it. The bank noted in the
downloaded file does not match the bank the user is trying to activate. The user must download
the appropriate bank file.
B-2 Reference Guide