Running Head
Using the Broadcast Option
To access the Broadcast option, press "v" (for View all) in the Main Cross-Connect Screen.
The All Circuits Screen of Figure 5-60 appears. In addition to the WAN card-to-WAN card
cross-connects, this screen also shows all user card-to-WAN card time slot assignments for all
WAN cards.
Because this screen shows all WAN time slots that are either assigned to user cards or
cross-connected to other time slots, it may be filled with data.
In addition to the two WAN-to-WAN cross-connects shown in Figure 5-59, an HSU circuit
from slot U1-1 to the San Francisco T1 circuit (on WAN 1-1), and an HSU circuit from slot
U1-2 to Phoenix (on WAN 2-2) are shown in Figure 5-60.
To select the broadcast option, place the cursor over the User card circuit that will be copied.
In this case, it will be the Denver end of the Denver-to-San Francisco link on WAN 1-1. Then,
press the "b" (Bcast) key from the actions at the bottom of the screen.
The screen of Figure 5-60 shows the dynamics of the first copy of that circuit. Press the
<Enter> key to access and modify the connection options.
5-74
System Configuration and Operation
Figure 5-60.Typical All Circuits Screen
Model No.
Reference Guide