ADPCM Card
19.3 ADPCM Card User Screens and Settings
19.3.1 ADPCM Card Main Screen
You must configure the ADPCM card ports for operation. This is done from the ADPCM Card
Main Screen, which is shown in Figure 19-1. To go to this screen, highlight the ADPCM card
in the System Main Screen and press <Enter>.
The bottom highlighted line of this screen shows several actions you can perform from the
screen. To perform an action, simply press the key indicated by the uppercase letter of the
desired action. For example, to save your configuration settings, press "s" to invoke the Save
command. Table 19-2 lists these actions.
Server Cards
ADPCM Card User Screens and Settings
Figure 19-1.Typical ADPCM Card Main Screen
19-3