Typical Test Screen And Abcd Bit Options; Wan Cross-Connect Test Screen Options - Zhone IMACS 8000 User Manual

Running Head
Testing Voice Cross-Connects
Figure 5-57.Typical Test Screen and ABCD Bit Options
Table 5-11. WAN Cross-Connect Test Screen Options
Parameter
Tx ABCD
PATTERN
MON Tx ABCD
MON Rx ABCD
CONVERSION
TYPE
WAN STATE
Tx ABCD BITS
The Transmit ABCD bit parameter has two options: mon (allowing you to observe the bit
pattern being sent on the transmit side of the line), and set (to choose a different pattern for
testing that portion of the circuit). Choosing set brings up a small four-character window at
the bottom of the screen, where you can type in a new pattern of ones and zeros.
5-70
System Configuration and Operation
User Options
mon set
off all 0 all 1 m_oos 1:1 1:7 lpbk 300Hz
1KHz 3KHz
information only–no user options
information only–no user option
information only–no user option
information only–no user option
information only–no user option
Model No.
Default
mon
off
Reference Guide