Running Head
Assigning Time Slots
4. Place an "x" under each desired time slot by using the space bar to either select or
de-select a time slot. Use the right arrow key to move to the next time slot (TS) for
selection. Then, press <Enter>. In Figure 5-22 (for T1), the HSU port is assigned five time
slots (20 to 24). In Figure 5-23 (for E1), the HSU port is assigned five time slots (12 to
17).
5. Change the STATE of the port from stdby to actv.
6. Press "s" to save your settings.
Note: In E1, time slots 0 and 16 are reserved.
Figure 5-22.Typical 2-Port HSU Card Time Slot Assignments for T1
5-40
System Configuration and Operation
Model No.
Reference Guide