Remote Amt Main Screen - Zhone IMACS 8000 User Manual

System Configuration and Operation
This procedure requires the use of a tftp server and both systems must have IP service
connectivity. The ideal location for the remote editing node is in a lab where IP connectivity
can be locally controlled.
NODE SETUP PROCEDURE:
8. From the IMACS shelf where the AMT MAP feature is desired, login to the shelf and go
to the sYs level, and then choose the Backup function. Choose the PROTOCOL of tftp,
and then choose Go. The system will begin a backup of the running database. Note that a
TFTP server must be operational in order for the database capture to be successful.
REMOTE NODE SETUP PROCEDURE:
1. On the remote shelf, ensure that only a single CPU-7 and appropriate IF card are installed.
2. Logon to the remote shelf, and go to the sYs level and select Z to zip the system. Confirm
at both prompts to erase all pre-existing configuration data. The IMACS shelf will reboot
as a result of this action.
3. Logon to the remote shelf using the default admin/admin username and password.
4. Navigate to the active CPU, carriage return, and then select tcp/Ip to enter IP information
on the remote system.
Reference Guide
Figure 5-93.Remote AMT Main screen
System Redundancy
5-111