Imux Call Screen Actions; Imux Call Screen Option Settings And Defaults - Zhone IMACS 8000 User Manual

HSU Card
Action
Save
Undo
Refresh
Main
Table 14-14. IMUX Call Screen Option Settings and Defaults
Parameter
BONDING MODE
TXDELAY TIMER
TXINIT TIMER
TXADD01 TIMER
TXDISC TIMER
TCID TIMER
TANULL TIMER
TXDEQ TIMER
TXFA TIMER
BONDING MODE
The Bonding Mode setting defines which end of the IMUX call will perform the
synchronizing tasks needed to complete the call. The options are mode0 (the end user
equipment will synchronize bandwidth) and mode1 (the terminating IMUX card will
synchronize bandwidth).
Note: Almost all IMUX applications will use mode1 synchronization.
TXDELAY TIMER
The Timer (bothway) Delay setting defines the duration of time for the final delay equalization
acknowledgment before allowing the call to commence. The values (in milliseconds) are 50,
100, 250 and 500. This timer is used for mode1 calls.
Data Cards
Table 14-13. IMUX Call Screen Actions
Saves changes to settings.
Returns all settings to the last saved state.
Updates certain time-related information fields that are not automatically
updated (i.e. performance and test data).
Returns to the HSU call profile screen. If changes are made to settings and
not saved, you will be prompted to save or lose changes.
User Options
mode0 mode1
50 100 250 500
5000 2500 7500 10000
60000 40000 80000 120000
1000 500 1500 2000
1000 2000 3000 4000
5000 2500 7500 10000
20000 10000 30000 50000
20000 10000 30000 40000
HSU Card User Screens and Settings
Function
Default
mode1
50
5000
60000
1000
1000
5000
20000
20000
14-37